ACT-LABS multi-platform racing system User Manual download pdf (Page 9)

installation

RS Installation

1. Turn off your game system before connecting your ACT

LABS RS.

2. Mount the wheel base to a tabletop or desk using the

two flywheel table clamps.

3. To connect the pedals, plug the pedal connector into

the pedal socket at the back of the wheel base (Figure

A).

4. Insert your RS Engine cartridge into cartridge slot at

the back of the wheel base (Figure B).

5. For game consoles: Plug the connector from your

cartridge into the first controller port of your game

console (Figure C).

For PC: Plug the 15-pin connector from the cartridge

into gameport #1 on your computer (Figure D).

6. Turn on your game system and you’re set. Follow your

game’s menu screens for more wheel options.

RS Wheel Setup (PC Only)

For PC Wheel Setup, take the steps listed below.

Setup CD-ROM : Use the enclosed Setup CD-ROM to load the

ACT LABS RS driver onto your computer

1. Insert the RS Setup CD into your CD-ROM drive

2. From Windows 95, in the Start menu, click Run.

3. Specify the disk drive and type “setup”. For example,

type “D:\setup” if your CD ROM is drive D.

4. Follow the instructions on your screeen and restart

your computer if necessary.

Note: To use your ACT LABS RS with PlayStation, N64, Sega

Saturn or other game console systems, please refer to the Quick

Reference Guide that comes with each specific RS Engine

cartridge.

RS MANUAL.v22 9/13/99, 11:12 AM7

Black

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

No comments

ACT-LABS multi-platform racing system User Manual Page 9